TAPTEMPO LFO MANUAL

– Orgy Out : LFO Outputs – +/-5V (10V P-P) – Tempo, Multiplier, Waveform, Wave Distort, Level CV: 0 to +5V.

TAPTEMPO LFO MANUAL

– Tap Button / Tempo LED: Manual Rate Setting – Tempo, Multiplier, Waveform, Wave Distort Initial Setting – Tempo, Multiplier, Waveform, Wave Distort External CV Amount Due to minor component variations, Multiplier and Waveform switching points may not precisely line up with panel graphics. Although normally imperceptable in the majority of cases, very small steps may be heard at extremely slow rates and wide control swings. All waveforms reset to the top of the waveform.ĬAVEATS – In that the 2260 waveforms are produced digitally, it should be noted that some amount of anti-aliasing effects occur at fastest rates. A phase reset on the first tap to the tap tempo input allows you to keep the LFO on the beat with a single tap. A CLOCK OUT which can be used to drive other equipment, allowing a tap-tempo controlled clock for an analog sequencer or drum machine, for example. The SYNC input can accept clock pulses from other equipment, which allows the 2260 to be syncronized to other devices. This convenient input can frequently save a separate VCA when doing voltage controlled modulation depth. The LEVEL CV input responds linearly to 0 to +5V and is normalled to +5V so that with no input, the 2260 outputs are at maximum.

Negative voltages are are permitted, but may sometimes cause unexpected results. The LFO tempo, multiplier, waveform selection, wave distortion, and output level are all voltage-controlled using 0 to +5V. This allows half- and double-time, and triplet times. The available multipliers are 0.5, 1, 1.5, 2, 3, and 4. This is combined with the tapped tempo to allow the LFO frequency to be set at a multiple of the tapped rate. Awesome possibilities!The 2260 can produce 8 waveforms, including a random (sample & hold) wave.Īll the waveforms except the random wave can be altered by the wave distortion CV. Or use it the other way around – control the 2260 tempo with a sequencer! You can even use multiple 2260s to create polyrhythmic LFOs using the built-in Multiplier ratios. You can build tap tempo effects vibratos and tremolos, tap tempo controlled drum machines or tap tempo sequencer clocks. You can set the LFO frequency by tapping the TAP button, supplying a periodic gate to the SYNC input, or by changing the Tempo CV. 1.Description The SSL 2260 Modulation Orgy LFO is the illegitimate Euro cousin to our 1260 Tap Tempo LFO, and is a special module indeed. This module has been added to the Benard Mega Bundle Vol. These high values will persist when the CV signal is disconnected, but the rate will jump back to the range of the CV knob when the latter is modified. This makes it possible to set the rate of the LFO to higher values than are possible with the rate knob by using CV. Notice that the Tap CV input is not capped to the range of the knob. It also has other features as in other Benard LFO modules, such as a polarity switch, outputs for sine, ramp, triangle, saw, pulse and S&H triggered noise (with separate output level controls), CV control of rate, a reset button and CV input, and pulsewidth control and CV input for the pulse signal. There is also a x2 toggles that allows you to double the rate of the oscillator (this toggle will also be disabled when CV tap input is connected). The rate knob will automatically adjust to the tapped value (except when using the CV tap input, in which case it will be disabled), so that you can make further adjustments. This is useful for when you want to match the rate of modulation to other signals or to the BPM of your track, or for when you simply want to match the rate you hear in your head when making a patch.

It can also display its rate in Hertz or beats per minute, using the switch on the right. This is an LFO that allows you to set the rate value by tapping a button, or through a CV tap input.

Taptempo lfo